 |
|||
|
Page Title:
Table A-XI. Minimum required ballistic limits (protection criteria), firing obliquity: 0, projectile: caliber .50 M2 AP. (co... |
|
||
| ||||||||||
|
|  MIL-A-12560H (MR)
w/INT. AMENDMENT 4
APPENDIX A
TABLE A-XI. Minimum required ballistic limits (protection criteria), firing obliquity: 0,
projectile: caliber .50 M2 AP- Continued.
0.735
2253
0.955
2612
1.175
2929
0.740
2262
0.960
2620
1.180
2936
0.745
2271
0.965
2628
1.185
2943
0.750
2279
0.970
2635
1.190
2949
0.755
2288
0.975
2643
1.195
2956
0.760
2297
0.980
2650
1.200
2963
1/ Specification requirements begin for this ordered thickness
2/ Specification requirements end for this ordered thickness.
Note 1: Tabulated values on either side of the specification requirements are for interpolation of
BL(P) requirements on undersize or oversize plates.
Note 2: For class 3 armor the upper ballistic limit (maximum) shall not be greater than 146 ft/sec
above the required lower ballistic limit (minimum).
30
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals