|
| MIL-A-46100D (MR)
w/INT. AMENDMENT 2
APPENDIX A
TABLE A-XI. Minimum required ballistic limits - 20 mm API-T M602 projectile at 0
degrees obliquity - Continued.
Thickness
Required
Thickness
Required
Thickness
Required
inches
BL(P), ft/sec
inches
BL(P), ft/sec
inches
BL(P), ft/sec
1.785
2848
1.975
3061
2.165
3260
1.790
2854
1.980
3066
2.170
3265
1.795
2860
1.985
3071
2.175
3270
1.800
2865
1.990
3077
1/ Specification requirements begin for this ordered thickness.
2/ Specification requirements end for this ordered thickness.
Note: Tabulated values on either side of the specification requirements are for interpolation
of BL(P) requirements on undersize or oversize plates.
CONCLUDING MATERIAL
Custodian:
Preparing activity:
Army - MR
Army - MR
Review activities:
Project 9515-2007-004
Army - AR, AT, EA, TE
DLA - IS
NOTE: The activities listed above were interested in this document as of the date of this
document. Since organizations and responsibilities can change, you should verify the
currency of the information above using the ASSIST Online database at
28
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |