 |
|||
|
|
|||
| ||||||||||
|
|  MIL-A-48449A(AR)
Rejected lots shall be
4.3.3 Acceptance and rejection.
Removal or correc-
screened for all defective characteristics.
tion of defective units and resubmittance of rejected lots shall
be in accordance with "Acceptance and Rejection" as specified
in MIL-STD-105.
4.4
Special
sampling.
4.4.1
General.
Three alignment devices shall be selected
at random by a Government representative as a special sample
The samples shall meet the requirements
from each 50 produced.
and tests in Table II and shall then meet the requirements and
tests in Table I.
Special
sampling
TABLE 11.
Test procedures
Requirements
Characteristics
No.
Applicable
drawings/
3.4
201.
Fabrication
Visual
MIL-F-13926/Visual
3.5
General
specification
202.
4.6.2
3.8.1
203.
Storage temperature
4.6.3
3.8.2
Operating temperature
204.
Inspection shall be performed
4.4.2 First article testing.
on the following characteristics during First Article Testing
Prior to performing these tests, the selected items
(See 4.2).
shall have met the inspection criteria outlined in Tables I and
II.
Upon successfully meeting the inspection criteria outlined
in Table III, the selected items shall be reinspected for those
characteristics of Table I.
First
article
testing
TABLE
III.
Test procedures
Requirements
No l
Characteristics
4.6.4
3.8.3
Shock
401.
4.6.5.1
3.8.4.1
Vibration
"A"
402.
9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals