 |
|||
|
|
|||
| ||||||||||
|
|  MIL-B-70776 (AR)
Examine
Defect
-
Length, width, or height exceeds specified maximum
Finished
requirement.
dimensions
Pallet pattern not as specified.
Palletization
Interlocking of loads not as specified.
Load not bonded with required straps as specified.
Exceeds maximum load limits.
Weight
Omitted; incorrect; illegible; of improper size,
Marking
location, sequence, or method of application.
PACKAGING
5.
5.1 Preservation. Preservation shall be level A or Commercial,
as specified (see 6.2) .
5.1.1 Level A. Each bandoleer shall have the flap snap
fastener closed. Six bandoleers, alternately reversed end for end,
shall be neatly stacked to form a bundle. The bundle shall be
securely tied in the center with cotton tape or twine.
Bandoleers shall be preserved in accordance
5.1.2 Commercial.
with ASTM-D-3951.
packing shall be level A, B or C, as specified
5.2 Packing.
(see 6.2).
5.2.1 Level A packing. One-hundred forty four bandoleers,
preserved as specified in 5.1, shall be packed in a snug-fitting
fiberboard shipping container conforming to style RSC-L, grade V2S
of PPP-B-636. The inside of each shipping container shall be fitted
with a box liner conforming to type CF, class weather-resistant,
variety DW, grade V15C of PPP-B-636. The inside dimensions of the
shipping container shall approximate 16 inches in length, 12 inches
in width and 18 inches in depth. Approximate dimensions are
furnished as a guide only. Each container shall have the content
completely covered on the top and bottom with a sheet of 30-pound
minimum basis weight kraft paper conforming to type I, grade B or
UU-P-268. Each shipping container shall be closed in accordance
with method III, waterproofed in accordance with method V, and
reinforced as specified in the appendix of PPP-B-636, except -that
inspection shall be in accordance with 4.4.6.
12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals