 |
|||
|
|
|||
| ||||||||||
|
|  MIL-B-81205(WP)
5.1.1.2 Drying - After cleaning, the Handling Bands
shall be dried in accordance with Specification MIL-116,
Procedure D-1 or D-4 or a combination of both.
5.1.1.3 Preservative application
5.1.1.3.1 Unpainted metal bearing surfaces - All unpainted
metal bearing surfaces shall be coated with grease conforming to
Specification MIL-G-3278.
5.1.1,3.2 Unpainted non-bearing metal surfaces - All
unpainted non-bearing metal surfaces shall be coated with pre-
servative compound conforming to Specification MIL-C-16173,
Grade 1.
5.1.1.4 Unit packaging - Wrap each Handling Band with
grease-proof barrier material conforming to Specification
MIL-B-121, Type II, Grade A, Class 2, and secure in place with
tape conforming to Specification PPP-T-60.
5.2 Packing - Packing shall be Level A or C as specified
(see 6.2).
5.2.1 Level A - Handling Bands, preserved and packaged as
specified in 5.1, shall be packed in wood boxes conforming to
Specification PPP-B-621, Style 4.
5.2.2 Level C - Handling Bands, preserved and packaged as
specified in 5.1, shall be packed for shipment in a manner
acceptable to common carriers for safe transportation to point
destination at the lowest transportation rate for the commodity.
This level is intended to provide adequate protection for immediate
use domestic shipments, from supply source to the first receiving
activity.
5,3 Marking - In addition to any special marking required
by the cent-ract or order, packages and packs shall be marked in
accordance with Standard MIL-STD-129.
6.
NOTES
6.1 Intended use - Handling Bands supplied under this
specification are intended for use in the handling and shipment
of the AQM-37A Target. Two (2) Handling Bands are required to
ship an AQM-37A Target Body in Container Mk 311 Mod 0.
-6-
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals