Lotting

Page Title: Lotting
Back | Up | Next

Web
www.tpub.com

Information Categories

....

MIL-C-10113C(EA)

4.4.1 Lotting. A regular production lot shall consist of the covers

produced in sequence during one month, as indicated by the dots In the

medallion on the cover. A sublet shall consist of the covers produced

in not more than one work week from one batch of material (see 6.6).

A new lot shall be established following the occurrence of my event

affecting the homogeneity of the lot or the use of an alternate approv-

ed formulation. Acceptably repaired covers from any accepted parent

lot may be incorporated into and assume the lot number of current pro-

duction.

4.4.2 Sampling

Sampling shall be conducted in accordance

4.4.2.1 For examination.

with MIL-STD-105.

4.4.2.2 For destructive tests. Thirty-nine test slabs (see 3.2.2)

shall be submitted with each sublet for testing.

4.4.3 Inspection procedure.

4.4.3.1 For examination. The sample covers from regular production

lots shall be examined in accordance with the classification of defects

and with MIL-STD-105.

4.4.3.2 For destructive tests. Sample test slabs shall be tested

in accordance with 4.4.4. The acceptance number is 0.

4.4.3.3 Classification of defects.

(a) Cover, outlet valve (Dwg C5 -2-598).

Defects