|
| MIL-C-10578D
28 February 1982
SUPERSEDING
MIL-C-10578C
31 March 1969
MILITARY SPECIFICATION
CORROSION REMOVING AND METAL CONDITIONING
COMPOUND (PHOSPHORIC ACID BASE)
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers five types of
concentrated phosphoric acid corrosion removing and metal
conditioning compound which, when diluted with water and applied
to metal surfaces, will remove rust from ferrous metal surfaces
and provide a slight etching action for ferrous and nonferrous
metals to promote the adhesion of paint or corrosion preventives
(see 6.1).
1.2 Classification. The compound shall be of the following
types, as specified (see 6.2).
Type
I
-
Wash-off
Type
II
-
Wipe-off
Type
III
-
Inhibited
Type
IV
-
Nonfoaming
Type
V
-
Immersion-tank
2. APPLICABLE DOCUMENTS
2.1
Government documents.
2.1.1 Specifications and standards. Unless otherwise
specified (see 6.2), the following specifications and standards
of the issue listed in that issue of the Department of Defense
Index of Specification and Standards (DODISS) specified in the
solicitation, from a part of this specification to the extent
specified herein.
Beneficial comments (recommendations, additions, deletions) and
any pertinent data which may be of use in improving this document
should be addressed to: Director, US Army Materials and
Mechanics Research Center, ATTN: DRXMR-SSS, Watertown, MA 02172
by using the self-addressed Standardization Document Improvement
Proposal (DD Form 1426) appearing at the end of this document or
by letter.
FSC 6850
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |