Design and construction:
Dimensions and configuration - See figure 1.
Case type - Feed-through (solder mount). Solder used internally shall have a minimum melting point
of 280 C.
Capacitance value - See table I.
Capacitance tolerance -
20 percent (M).
Rated temperature - -55 C to +125 C.
Rated voltage: See table I.
TABLE I. Style CK99 characteristics.
Dielectric withstanding voltage (DWV): In accordance with MIL-C-11015.
Test voltage - 200 percent of dc rated voltage applied between the terminal and the mounting flange..
Body insulation: Not applicable.
Barometric pressure (reduced): In accordance with MIL-C-11015 and method 105 of MIL-STD-202, condition C
Test potential - 200 percent of dc rated voltage applied between the terminal and the mounting flange.
Insulation resistance (IR): In accordance with MIL-C-11015 and method 302 of MIL-STD-202, condition B, or
rated voltage, whichever is less, 500 megohms, minimum, measured between the terminal and the mounting
Dissipation factor (DF): 5.0 percent, maximum.
Shock (specified pulse): In accordance with MIL-C-11015 and method 213 of MIL-STD-202, condition A (50 g's).
Vibration, high frequency: In accordance with MIL-C-11015 and method 204 of MIL-STD-202, condition D (20 g's).
Mounting: Capacitors shall be rigidly mounted by the body.
Thermal shock and immersion: In accordance with MIL-C-11015.
IR: 50 megohms, minimum.