 |
|||
|
Page Title:
Figure 1. Quality factor (Q) at 1 megahertz (MHz) |
|
||
| ||||||||||
|
|  MIL-C-11272D
w/Amendment 1
FIGURE 1. Quality factor (Q) at 1 megahertz (MHz).
3.14 Moisture resistance. When tested as specified in 4.6.11, capacitors shall meet the following requirements:
a.
Visual examination - There shall be no evidence of corrosion or mechanical damage that will affect life or
serviceability.
b.
At 90 to 95 percent relative humidity:
(1)
Insulation resistance - 1,000 megohms, minimum.
At 50 5 percent relative humidity:
c.
(1)
Dielectric withstanding voltage - There shall be no evidence of damage, arcing, or breakdown.
(2)
Insulation resistance - Not less than 100,000 megohms.
(3)
Capacitance - Change not more than 0.5 percent of the nominal value or 0.5 pF, whichever is greater,
from the initial value obtained when measured as specified in 4.6.5.
(4)
Dissipation factor - Not to exceed 0.001.
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals