 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-18244A(WEP)
5. PREPARATION FOR DELIVERY
5.1
Packaging Requirements - In the event of direct purchases by or shipments to the
Government, the packaging shall be in accordance with the contract or the approved detailed specifi-
cation, as applicable. Components shall be delivered complete, tested, and ready for installation.
All receptacles, ports, and delicate protruding shafts or parts which may be damaged during handling
shall be protected by dust-tight covers, caps, or plugs during shipping, storage, and handling.
6. NOTES
6.1
Intended Use - The requirements of this specification are general as applicable
to flight control systems and are based on service experience to date. Deviations to the requirements
of this specification may be granted following presentation and approval of substantiating data. This
specification is intended for use to incorporate by reference in the equipment detail specification or
(when no specification is available) in the equipment contractor order.
6.2
Detail Data for Equipment Specification - Since this specification covers only the
general requirements for parts, materials, processes and design, the detail specification for the
equipment should specify the actual requirements for that particular equipment from the multiple
choices or exceptions which are available in the following items:
(a) Type of aircraft for which AFCS equipment is to be .
designed and used,
(b) Detail each integration situation requirement,
3.1.1.2.1.1
(c) Heading selection.
3.1.1.5.2.3
(d) Stick maneuvering (pitch and roll attitude).
3.1.1.5.5.3
(e) Control surface oscillations limits.
3.1.1.6.2
(f) Adequate test requirements,
Section 4
(g) Preparation for delivery.
5.1
6.3
Additional information on "Microeletronic Modular Assemblies" and "Aircraft
Electronic Equipment Maintainability" will be available upon application to the Bureau of Naval
Weapons, Washington 25, D. C. Attention: Avionics Division.
NOTICE - When Government drawings, specifications, or other data are used for any purpose
other than in connection with a definitely related Government procurement operation, the United
States Government thereby incurs no responsibility nor any obligation whatsoever; and the fact
that the Government may have formulated, furnished, or in any way supplied the said drawings,
specifications, or other data is not to be regarded by implication or otherwise as in any manner
licensing the holder or any other person or corporation, or conveying any rights or permission
to manufacture, use, or sell any patented invention that may in any way be related thereto,
30
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals