 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-37021
Table II.
In-Process Classification of defects (cont'd)
Metal Fabrication (Sheets, plates and tubing)
Major Minor
Metal not free from dents, folds, or distortions
x
(seriously affecting appearance or serviceability).
Metal not free from dents, folds or distortions
(not seriously affecting appearance or
x
serviceability) .
Shearing, bending, or cutting not neat and
accurate "(seriously affecting appearance,
x
serviceability, or can cause injury).
Shearing, bending, or cutting not neat and
accurate (not seriously affecting appearance,
serviceability or cannot cause injury).
x
Forming not neatly finished.
x
4.4.2 End item examination.
4.4.2.1 Visual examination. End item examination shall be conducted in
accordance with the following classification of defects. Examination shall
include, but shall not be limited to, the defects listed in table III. The
inspection level shall be S-3 with an acceptable quality level (AQL) of 2.5
for major defects and 40 for total defects, expressed in terms of defects per
hundred units. The unit of product shall be the component of-an end item
or an end item, as applicable.
Table III.
End Item Classification of defects
Design and Construction
Major Minor
Design and construction of chair not
x
as specified.
Design and construction of stool not
x
as specified.
Design and construction of case not
x
as specified.
Color
x
Color of upholstery not as specified.
x
Color of case not as specified.
x
Color of base cover not as specified.
16
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals