 |
|||
|
Page Title:
Cap, Fuel Tank: for Military Combat and Tactical Transport Vehicles |
|
||
| ||||||||||
|
|  MIL-C-45300B
16 February 1988
SUPERSEDING
MIL-C-45300A
18 November 1964
MILITARY SPECIFICATION
CAP, FUEL TANK: FOR MILITARY
COMBAT AND TACTICAL TRANSPORT VEHICLES
This specification is approved for use by all Departments and Agencies of
the Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers three types of fuel tank caps
intended for use on military vehicles. The type I and type XI fuel tank caps
are vented, while the type III fuel tank cap is nonvented (see 6.1).
1.2 Classification. Fuel tank caps, hereinafter referred to as "caps",
shall be of the following types, as specified (see 6.2):
Type I
Vented cap with pressure relief valve and
float assembly (MS51300).
Vented cap with pressure relief valve and
Type II
fording valve (MS35645).
Nonvented cap (MS3507S).
"Type III
APPLICABLE DOCUMENTS
2.
2.1 Government documents.
2.1.1 Specifications and standards. The following specifications and
standards form a part of this specification to the extent specified herein.
Unless otherwise specified, the issues of these documents shall be those
listed in the issue of the Department of Defense Index of Specifications and
Standards (DOT)ISS) and supplement thereto, cited in the solicitation.
AMSC N/A
FSC 2910
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is unlimited.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals