Click here to make tpub.com your Home Page

Page Title: Quality Assurance Provisions
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-C-45978A(AR)
Bore enlargement.
TABLE 1.
Distance
forward of
the Com-
2 cals to
mencement
muzzle
1 cal.
1 inch
0.10 inch
of rifl ing
mount
0.006
0.008
0.008
0.003
{inches)
Interpolate to determine the amount between given
NOTE :
distances.
4.
QUALITY ASSURANCE PROVISIONS
Responsibility for inspe ction.  Unless otherwise specified
4.1
in the contract or purchase order, the contractor is responsible
for the performance of all inspection requirements (examinations
and tests) as specified herein.  Except as otherwise specified in
the contract or purchase order, the contractor may use his own or
any other facilities suitable for the performance of the
inspection requirements specified herein, unless disapproved by
the Government.  The Government reserves the right to perform any
of the inspections set forth in this specification where such
inspections are deemed necessary to ensure supplies and services
conform to prescribed requirements.
esponsibility for compl iance.  All items shall meet all
4.1.1
requirements of sections 3 and 5.  The inspection set forth in
this specification shall become a part of the contractor's
overall inspection system or quality program.  The absence of any
inspection requirements in the specification shall not relieve
the contractor of the responsibility of ensuring that all
products or supplies submitted to the Government for acceptance
comply with all requirements of the contract.  Sampling
inspection, as part of manufacturing operations, is an acceptable
practice to ascertain conformance to requirements, however, this
does not authorize submission of known defective material, either
indicated or actual, nor does it commit the Government to accept
defective material.
4.2 Cla ssification of inspections.  The inspection requirements
specified herein are classified as follows:
a.
First article inspection (see 4.4).
First Article - Initial Production Test (FA-IPT)
b.
(see 4.5).
6

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business