 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-46577D
3.15.1 Process Defects. -The cartridge shall be free of defects such as
folds, wrinkles, buckles, cracks, splits, severe scratches, cuts, dents,
perforations, loose components and other forms of substandard workmanship.
3.15.2 Cleanliness. -The cartridge and its components shall be free of all
foreign matter.
(see 6.6)
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for Inspection. -Unless otherwise specified in the
contract or purchase order, the supplier is responsible for the perform-
ance of all inspection requirements as specified herein. Except as other-
wise specified in the contract or order, the supplier may use his own or any
other facilities suitable for the performance of the inspection requirements
specified herein, unless disapproved by the Government. The Government
reserves the right to perform any of the inspections set forth in the
specification where such Inspections are deemed necessary to assure sup-
plies and services conform to prescribed requirements.
4.1.1. Quality Assurance Terms and Definitions.-Reference shall be made
to MIL-STD-109 for definition of quality assurance terms.
4.2 Classification of Inspections.-The inspection requirements specified
herein are classified as follows:
1.
First Article Inspection (see 4.3).
2.
Quality Conformance Inspection (see 4.4).
4.3 First Article Inspection.
4.3.1 First Article Sample.-At the beginning of production, a sample
representative of the production material, equipment, processes and pro-
cedures shall be submitted in accordance with contract requirements and
shall consist of 695 cartridges. Prior to approval of the first article
sample, the acquisition of material or components for, or the commencement
of production of the balance of the contract quantity shall be at the sole
risk of the contractor.
4.3.1.1 First Article Inspection.-Prior to submission of the first article
sample to the Government, the contractor shall inspect all components and
assemblies for all contract, drawings and specification requirements. The
contractor's inspection shall be subjected to verification by the Government
representative.
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals