 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-48610B(AR)
3.
3.1 Fabrication. The low voltage power supply control logic circuit card
assembly, herein referred to as the assembly, shall be manufactured in
accordance with Drawing 11746908 and drawings pertaining thereto and, when
assembled, shall meet the requirements of this specification. (See 4.5.1)
3.1.1 Function. The assembly shall provide the following functions:
--
Designation
a.
Continuity
b.
Output voltage characteristics
c.
15 Volt sense and overcurrent
d.
Q-switch drive
e.
Sync signals A and B
f.
Q-switch drive regulator
3.1.2 General specifications. The following provisions of MIL-F-13926
apply: (See 4.5.1)
a.
Order of precedence
b.
Dimensions and tolerances
c.
Inorganic protective surface finishes
Part identification and marking
d.
e.
Workmanship
3.1.3 Ambient conditions. Standard ambient conditions shall be as
follows:
73 + 18F
a. Temperature
50 percent + 30 percent
b. Relative humidity
28.5 + 2.0 -3.0 in. Hg.
c. Atmospheric pressure
3.2 First article. When specified (see 6.2), the contractor shall
furnish sample units first article inspection and approval (see 4.4 and
6.2).
3.3 Performance. Unless otherwise specified, the assembly shall meet the
performance requirements specified herein under standard ambient conditions of
3.1.3.
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals