 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-50446A(AR)
STANDARDS
MILITARY
Sampling Procedures and Tables for
MIL-STD-105
Inspection by Attributes
Packaging, Packing and Marking for
MIL-STD-1169
Shipment of Inert Ammunition
Components
DRAWINGS (See 6.8)
U.S. ARMY ARMAMENT RESEARCH AND DEVELOPMENT COMMAND
Case, Cartridge, 40MM, M118
8844610
2.2 Other publications. The following documents form a part of
this specification to the extent specified herein. Unless otherwise
indicated, the issue in effect on the date of invitation for bids or
request for proposal shall apply.
AMERICAN SOCIETY FOR TESTING AND MATERIALS
Standard Method of Salt Spray (Fog)
ASTM
B
117-64
-
Testing
Standard Methods of Test for
ASTM
E
18-67
-
Rockwell Hardness & Rockwell
Superficial Hardness of Metallic
Materials
(Application for copies should be addressed to: American Society for
Testing and Materials, 1916 Race Street, Philadelphia, PA 19103)
3. REQUIREMENTS
3.1 Material. Materials shall be in accordance with the
applicable drawings and specifications.
3.2 Part. The part shall comply with all requirements specified
on Drawing (Dwg.) 8844610 all associated drawings, and with all
requirements specified in applicable specifications.
3.3 Hydrostatic pressure. The cartridge case, less vent holes,
shall be capable of withstanding a hydrostatic pressure of 48,000 pounds
per square inch (psi), minimum (min.), without evidence of a rupture Of
the bottom of the charge cup cavity. Cases especially prepared for this
test shall be identified from regular cases by painting a red stripe
around the open end, or any positive identification approved by the
procuring activity.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals