 |
|||
|
Page Title:
Submission of results of contractor-conducted examinations and tests |
|
||
| ||||||||||
|
|  MIL-C-50447A (PA)
3.3 Workmanship .-All parts and assemblies shall be
fabricated and finished in a thorough, workmanlike manner.
They shall be free of burrs, chips, sharp edges, cracks,
unblended radii, surface defects, dirt, grease, rust, corro-
sion products, and other foreign matter. The cleaning method
used shall not be injurious to any parts, nor shall the parts
be contaminated by the cleaning agents. All marking and
stamping shall be neat and sharply defined.
3.4 Submission of results of contractor-conducted
examinations and tests.- The contractor shall forward copies
of the results of any of his examinations or tests to the
designated address as required by the contract. (See 6.4).
3.5 First Article Inspection. -This specification con-
tains technical provisions for first article inspection.
Requirements for the submission of first article samples by
the contractor shall be as specified in the contract.
4.
QUALITY ASSURANCE PROVISIONS
.
4.1 Responsibility for Inspection and Standard Quality
Assurance Provisions.-unless otherwise specified herein or
in the contract, the provisions of MIL-A-48078 shall apply
and are hereby made a part of this detail specification.
4.2 Classification of Inspections.-The following types
of inspection shall be conducted on this item:
First Article Inspection
Quality Conformance Inspection "
4.3 First Article Inspection.-
4.3.1 Submission.-The contractor shall submit a first
article as designated by the Contracting Officer for evaluation.
in accordance with the provisions of 4.3.2. The first article
sample shall consist of the following items In sample quanti-
ties as indicated.
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals