 |
|||
|
Page Title:
Table IV. Defect Classification |
|
||
| ||||||||||
|
|  MIL-C-50509A(AR)
TABLE IV
Defect
Classification
Classification
Defect
Incorrect color
Critical
Burst or ejects pellets
within 50 feet of the launcher
Critical
Any projectile assembly
sticks in the gun bore
Critical
Burning time incorrect (see 3.4.2)
Major
The first emission of light shall
be at an average altitude of 600
100 ft
Major
Altitude less than 350 ft
Major
Item fails to function
Major
Less than five stars
Major
4.4.3.8 Transportation-vibration, regular production.
After
three (3) acceptable lots have complied with 4.4.3.5 and 4.4.3.7,
one-hundred and thirty-two (132) of the samples subjected to the
100% air pressure test shall be selected from each lot, packed in
their regular shipping containers and subjected to this test. The
lot shall be rejected if any defect as classified in TABLE III
occurs.
4.4.3.9 Air pressure, regular production.
After completion
of the transportation-vibration test, the one-hundred and thirty-
two (132) samples shall be removed from their shipping containers
and subjected to this test.
If eight (8) or more samples fail to
comply with the requirement specified on the applicable drawing,
the lot shall be rejected.
Cartridges which fail this test shall
be discarded and replaced with units which have been successfully
subjected to transportation-vibration test prior to subsequent
testing.
4.4.3.10 Functioning,
regular production.
After three (3)
acceptable lots have complied with 4.4.3.7, the one-hundred and
thirty-two (132) samples subjected to the air pressure test shall
be packed and shipped to a Government proving ground and tested as
follows:
4.4.3.10.1
Hot.
Twenty-six (26) samples shall be subjected
to this test.
Eighty (80) samples shall be subjected
4.4.3.10.2
Ambient.
to this test.
27
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals