 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-50743(MU)
8 August 1973
4.3 Inspection provisions,
4.3.1 Submission of product. Unless otherwise specified herein
or by the contracting officer, inspection lot size, lot formation and
presentation of lots shall be in accordance with inspection and sampling
procedures herein and submission of product provisions of MIL-STD-105.
4.3.2 Examination and tests.
4.3.2.1 Components and subassemblies. All components and
subassemblies shall be inspected in accordance with the inspection
provisions contained in the respective specifications and Supplementary
Quality Assurance Provisions (SQAP) listed in the technical data package
(TDP). In the absence of SQAPs, the applicable quality assurance
provisions of MIL-F-13926 shall apply.
4.3.2.2 First article testing. First article testing shall be
conducted in accordance with tables VIII through XI to dete rmine com-
pliance with 4.2. All examinations and tests shall be witnessed by the
Government Quality Assurance Representative. When manufacturing
processes, materials, or inspection techniques previously appLied are
subject to change, or an adverse change occurs in performance capa-
bility of te unit, this shall be cause to cease those operations contributing
to the change or failure until corrections have been made by the contrac-
tor and approved by the Government.
4.3.2.3 Functional tests. The requirements and tests in table
VIII shall be inspected on a 100 percent basis. All examinations and
tests shall be conducted at the standard ambient temperature.
4.4 Special sampling. The selection of samples shall be in
accordance with section 7 of MIL-STD-105.
4.4.1 General. One unit shall be selected at random by a
Government representative as a control sample from each 50 produced.
The control sample shall meet the requirements and tests in table IX.
4.4.2 Environmental. Three units shall be selected at random
by a Government representative as a control sample from each 50
produced or from each month's production, whichever occurs first.
The control samples shall meet the requirements and tests in table X.
18
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals