 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-63990C (AR)
Quality conformance inspection.
4.5
Lot formation shall comply with
4 .5.1 Lot formation.
MIL-A-48078.
4.5.2 Lot submission. The product shall be submitted in
accordance with MIL-A-48078.
4.5.3 Component parts. Unless otherwise specified,
component lots shall be homogeneous and of a size convenient to
the contractor and shall be inspected, tested and accepted by the
contractor. The cartridge lot shall not contain:
a.
Cartridge cases from more than one manufacturer or
process.
b. Primers from more than one lot interfix number
from one manufacturer.
Bullets from more than one manufacturer.
c.
Bullets from more than one process.
d.
Propellant from more than two lots.
e.
f.
Propellant from more than one manufacturer.
4.5.4 Lot identification. Each lot of ammunition shall be
identified as to type, caliber and model, and shall incorporate a
lot number in accordance with MIL-STD-1168.
4.5.5 Inspections to be performed. Inspection shall be as
specified in 4.5.6 (Examination and tests) and the Quality Con-
formance Testing Table.
4.5.6 Examinations and tests.
a. Classification of characteristics. Quality
conformance examinations and tests are specified in the following
Classification of Characteristics paragraphs. The contractor's
quality program or detailed inspection system shall provide
assurance of compliance of all characteristics with the
applicable drawing and specification requirements utilizing as a
minimum the conformance criteria specified. When cited herein,
attributes sampling inspection shall be conducted in accordance
with Table II below, using the inspection levels stated in the
Classification of Characteristics paragraphs. Examination shall
be visual or by means of a Government approved automated
inspection system such as optical, mechanical or electrical. All
13
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals