 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-64025(AR)
TABLE 2
Data P a t t e r n
Pattern
Capacitance
(bits
12345678)
A
10000000
91 pF
+ 10 %
01000000
180pF
+ 10 %
B
c
00100000
360pF
+5%
D
00010000
720pF
+5%
3.7.4 Power handling capability.
With a 50 ohm load between
RFOUT and GROUND and the data pattern associated with the 50 ohm load
(A) of Table 3 applied to the TUNE DATA input per Figure 5, apply an
.
RF signal of 12 Watts at frequency Fo having a source impedance of 50
ohms to RFIN. The RF output at the 50 ohm termination shall be greater
than 10 Watts (refer Table 3). The Tuner shall output an RF power
.
level greater than the level specified in Table 3 when each of the
remaining loads of Table 3 are connected between RFOUT and GROUND, the
data pattern associated with each load is applied to the TUNE DATA
input per Figure 5 and the above RF source is applied to RFIN. Each of
the complex loads of Table 3 are comprised of a set of inductor(s)
and/or capacitor(s) between the RF output and a 50 ohm resistive
termination. The power output shall be
measured
across
the
50
ohm
termination when tested per 4.5.5.4.
TABLE 3
Data
Pattern
Load
Load
Impedance
Power
Output(min.)
(bits
12345678)
00000000
A
50
10 Watts
10
Watts
B
50
00001000
c
50 -
j169
00001111
10
Watts
D
50 +
j152
10
Watts
10011011
E
83 +
j88
11011110
10
Watts
F
316-
j169
00101101
10
Watts
G
79 +
j183
00011011
10
Watts
3.8 Transmitter Electronic Components Assembly Performance
characteristics . This--section describes the performance
characteristics of the Transmitter Electronic Components Assembly,
assembly number 9333579, consisting of assembly number 9333590(A3) and
assembly number 9333595(A4).
13
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals