|
| ![]() MIL-C-64025(AR)
3.9.11.3 Previous SEND --code. selection. The SENDER shall displa
.
the previously selected SEND code 16 + 1.0 seconds after power is
applied to A2-E34 (+15V) if the Correct STORE code has been entered
within the first 15 seconds after power application at A2-E34 (+15V)
when tested per 4.5.7.18.
3.9.11.4 Invalid STORE code entry. The SENDER shall
display "INVALID" 16 + 1.0 seconds after power is applied to
A2-E34 (+15V) if-an incorrect or incomplete STORE code or no
entry is keyed in within the first 15 seconds when tested
per 4.5.7.12 and 4.5.7.14.
SEND code selection.
3.9.12
3.9.12.1 SEND code selection prompt. The SENDER shall display
"AUTO" when the SENDER is in the STORE mode and the AUTO key has been
entered when tested per 4.5.7.16 and 4.5.7.17.
3.9.12.2 SEND code display. The SENDER shall display a four
digit SEND code when the SENDER is in the STORE mode and the TRANSFER
key is entered sequentially following the AUTO key when tested per
4.5.7.17,
SEND mode
3.9.13
3.9.13.1 Power on Prompt . When a valid STORE code has been
established and A2-E38 (S.C.S) is open, the SENDER shall display "ON"
when power is applied to A2-E34 (+15V).
S . mode entry displav. If the SEND code has been
3.9.13.2 --END -- . .
correctly keyed in within the first 15 seconds after power has been
applied to A2-E34 (+15V), the SENDER shall display "n cmd", where n is
the GROUP ID (set to 1 on entering the SEND mode) and cmd is one of:
NONE , TRANSFER, DEPLOY, RESET SD, and DESTRUCT when tested per
4.5.7.22.
3.9.13.3 Invalid SEND code entry. The SENDER shall display
"INVALID" 16 + 1.0 seconds after power is applied to A2-E34 (+15V) if
an incorrect or incomplete STORE Code or no key is entered within 15
seconds when tested per 4.5.7.21.
3.9.14 Display timeout.
The SENDER shall blank the
display in the SEND or STORE mode after 10 + 1.0 seconds of
keyboard inactivity when tested per 4.5.7.16.
Group capabilities
3.9.15
17
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |