 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-64025(AR)
t
3.9.17.1 Status format. The status format shall be ` n stat",
where n is the GROUP ID number 1 to 15 inclusive and stat is one of:
NONE, TRANSFER, DEPLOY, RESET SD, and DESTRUCT when tested per
4.5.7.24 and 4.5.7.28.4.
3.9.17.2 Group "ALL". status format. The status format shall be.
"ALL" for the GROUP ID of ALL when tested per 4.5.7.26.
3.9.17.3 Initial status. After initial power application or
reassigning of the SEND or STORE codes, all groups shall begin with
initial status of NONE when tested per 4.5.7.22 and 4.5.7.24.
3.9.17.4 Status update sequence. The group status shall be
updated as specified by the state diagram of Figure 4 when tested
.
4.5.7.31.
3.9.18 RCU to CI transfer
3.9.18.1 Transfer display. The SENDER shall momentarily display
"SENDING" when the TRANSFER key is entered, the SENDER is in the SEND
mode, and the GROUP ID is not "ALL" when tested per 4.5.7.23.
3.9.18.2 Transfer output. When the load of Figure lb is placed
across A2-E35 (MCD1) and A2-E36 (MCD2), an FSD pulse sequence shall be
generated at the output of the load as specified in Figure 2 for the
current group and RCD code in response to a TRANSFER command when
tested per 4.5.7.23.
Group status update.
When the FSD pulse sequence has
3.9.18.3
completed, the group status display shall be updated as specified by
3.9.17.1 and 3.9.17.4 when tested per 4.5.7.23.
3.9.18.4 Invalid transfer group. The SENDER shall display "ALL
INVALID" when the TRANSFER key is entered, the SENDER is in the SEND
and the current GROUP ID is "ALL" when tested per 4.5.7.26.
mode,
Command transmission
3.9.19
3.9.19.1 Command display. The SENDER shall display "DEPLOY n".,
"DESTRUCT n", or "RESET SD n" (n is the current GROUP ID), when the
DESTRUCT j or R'SET SD key respectively is entered, and the
DEPLOY,
SENDER is in the SEND mode when tested per 4.5.7.28.
3.9.19.2 Tuning sequence display.
The SENDER shall display
"TUNING" when A2-E39 (XMIT) is momentarily driven to a logic zero (0.2
+ 0.2 volts) sequentially after the DEPLOY, DESTRUCT, or R'SET SD key
is entered and the SENDER is in the SEND mode when tested per
4.5.7.28.1.
19
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals