Click here to make tpub.com your Home Page

Page Title: Classification of inspection.
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-C-64030(AR)
3.12 Electrostatic discharge control.  All areas where
electronic components or assembles are present shall comply with
the ESD protection requirements of DOD-STD-1686 and DOD-HDBK-263.
An ESD plan shall be prepared and submitted to the Government.
3.13 Safety. A safety plan shall be prepared and submitted
to the Government for the storage, handling and disposal of
lithium batteries.
3.14 Workmanship.  All parts and assemblies shall be
fabricated and assembled in a thorough, workmanlike manner.  They
shall be free of burrs, sharp edges, cracks, dirt, grease, rust
and other foreign matter.  The cleaning method used shall not be
injurious to any parts, nor shall the parts be contaminated by the
cleaning agents.  Exterior surface coatings shall be continous;
however, light scratches not exposing base material may be
permitted.  All required marking and stamping shall be neat and
sharply defined.
4.
QUALITY ASSURANCE PROVISIONS
4.1  Responsibilities for inspection and standard quality
assurance Provisions.  Unless otherwise specified herein or in the
contract, the provisions of MIL-S-48078 shall apply and are herein
made a part of this detail specification.
4.2 Classification of inspection.  The following types of
inspection shall be conducted on this item.
First article inspection.
a.
b.
Quality conformance inspection
4.3
First article inspection.
4.3.1 Submission.  The contractor shall submit a first
article sample, as designated by the contracting officer, for
evaluation in accordance with the provisions of 4.3.2 and 4.3.3.
The first article sample shall consist of the items and sample
quantities listed in Table I.
4.3.2
Inspections to be performed.
See MIL-A-48078.
4.3.3 Rejection.
4.3.4 Requalification.  The contractor shall be subjected to
another first article for the component or assembly affected as
stipulated in the contract, if any of the following occur:
10

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business