 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-70491(AR)
4.6.8 Workmanship. "The display/processor circuit card
assembly shall be subjected to a visual and tactile examination
for evidence of faulty workmanship. The assembly shall conform to
the requirements of 3.6.
4.7 Reliability testing. `The requirement for reliability
test approval and the responsibility (Government or contractor)
for reliability testing shall be as specified in the contract.
The sample for reliability test shall consist of 3
display/processor circuit card assemblies.
The samples shall be
manufactured in the same manner, using the same materials,
equipment, processes, and procedures as will be used in the
production of the balance of the contract quantity. All parts and
materials including packaging and packing, shall be obtained from
the same source of supply as will be used in the production of the
balance of the contract quantity.
4.7.1 Government testing. When the Government is responsible
for conducting reliability tests, the contractor prior to
submitting the sample to the Government, shall inspect the sample
to assure that it conforms to all requirements of the contract and
submit a record of this inspection with the sample, including
certificates of conformance for all materials.
4.7.2 Contractor testinq. When the contractor is responsible
for conducting reliability tests, the sample shall be inspected
and tested by the contractor for all the requirements of the
contract. The sample and a record of these inspections and tests,
including certificates of conformance for all materials, shall be
submitted to the Government for approval. The Government reserves
the right to witness any or all of the contractors reliability
tests and inspections.
PREPARATION FOR DELIVERY
5.
5.1 Delivery requirements. Handling, packaging, packing,
shipping, and marking of the display/processor circuit card
assembly, 9379229-1 shall be in accordance with Packaging Data
Sheet 9379229-1. The level of protection shall be as specified in
the procurement document.
NOTES
6.
6.1 Intended use. The display/processor circuit card
assembly described herein is intended for use in the MBC. See
drawing 11785850.
20
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals