 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-70496(AR)
4.6.4 common connector contact continuity. This test shall be
conducted with no external power connected to the supply. Measure
with an ohm meter the resistance between the connector contacts
specified in 3.2.1.11. The resistances shall be as specified in
3.2.1.11.
4.6.5 Workmanship. The supply shall be subjected to a visual
and tactile examination for evidence of faulty workmanship. The
supply shall conform to the requirements of 3.6.
4.7 Reliability testing. The requirement for reliability test
approval and the responsibility (Government or contractor) for
reliability testing shall be as specified in the contract. The
sample for reliability test shall consist of 3 supplies. The
samples shall be manufactured in the same manner, using the same
materials, equirpment, processes, and procedures as will be used in
the production of the balance of the contract quantity. All parts.
and materials, including packaging and packing, shall be obtained
from the same source of supply as will be used in the production of
the balance of the contract quantity.
4.7.1 Government testinq. When the Government is responsible
for conducting reliability tests, the contractor prior to
submitting the sample to the Government, shall inspect the sample
to assure that it conforms to all requirements of the contract and
submit a record of this inspection with the sample~ including
certificates of conformance for all materials.
4.7.2 Contractor testinq. When the contractor is responsible
for conducting reliability tests, the sample shall be inspected and
testted by the contractor for all the requirements of the contract.
The sample and a record of these inspections and tests, including
certificates of conformance for all materials, shall be submitted
to the Government for approval. The Government reserves the right
to witness any or all of the contractors reliability tests and
inspections.
PREPARATION FOR DELIVERY
5.
5.1 Delivery requirements. Handling, packing packing
shipping, and marking of the Power Supply Logc Circuit Card
Assembly, 9355846 shall be in accordance with Packaging Data Sheet
9355846. The level of protection shall be as specified in the
procurement document.
NOTES
6.
6.1 Intended use. The power supply logic circuit card
assembly described herein is intended for use in the MBC. See
drawing 11785850.
12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals