 |
|||
|
Page Title:
Table III. Attributes sampling inspection. |
|
||
| ||||||||||
|
|  MIL-C-70725A (AR)
Attributes sampling inspection.
TABLE III.
Lot Size
Inspection Levels
I
II
5
2
to 8
5
9
to 15
5
16
to 25
32
5
26
to 50
13
32
51
to 90
13
32
91
to 150
20
32
151
to 280
20
32
281
to 500
20
80
501
to 1,200
32
80
1,201
to 3,200
32
125
3,201
to 10,000
125
50
10,001
to 35,000
50
125
35,001
to 150,000
50
200
150,001
to 500,000
200
50
500,001
and over
Numbers under inspection levels indicate sample
size; asterisks (*) indicate one hundred percent
inspection. If sample size exceeds lot size,
perform one hundred percent inspection. Accept on
zero and reject on one or more for all inspection
levels.
b. Alternative quality conformance provisions.
Unless otherwise specified herein or provided for in the
contract, alternative quality conformance procedures, methods or
equipment, such as statistical process control, tool control,
other types of sampling plans, etc., may be used by the
contractor when they provide, as a minimum, the level of quality
assurance required by the provisions herein. Prior to applying
such alternative procedures, methods or equipment, the contractor
shall describe them in a written proposal submitted to the
Government for evaluation (see 6.9). When required, the
contractor shall demonstrate that the effectiveness of each
proposed alternative is equal to or better than the specified
quality conformance provisions(s) herein. In case of dispute as
to whether the contractor's proposed alternative(s) provides
equivalent assurance, the provisions of this specification shall
apply. All approved alternative provisions shall be specifically
incorporated into the contractor's quality program or inspection
system, as applicable.
23
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals