|
| ![]() MIL-C-70725A (AR)
g. Fired cases shall be visually examined by the
technician for possible case casualties.
Cyclic rate.
50.3
50.3.1 Cyclic rate measurements. Cyclic rate measurements
shall be taken in pairs as indicated in the firing schedule. TO
determine compliance with the cyclic rate requirements, cyclic
rate values shall be averaged together as follows:
a. Starting average - The first three cyclic rate
values taken at the start of all 500-round segments, from the
same weapon type, at the same temperature, shall be averaged
together.
b. Ending average - The last three cyclic rate values
taken at the end of all 500-round segments, from the same weapon
type, at the same temperature, shall be averaged together.
c. Overall average - The average of all cyclic rates
recorded throughout the 500-round segments, as indicated on the
firing schedule for each weapon type at each temperature
condition.
d. The starting, ending, and overall average must
meet the requirement for cyclic rate as specified for that weapon
type.
C-3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |