 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-70726A (AR)
*
4.6.1.4.6 Fouling. Five 100 round bursts of the test
cartridges shall be fired in full automatic action IAW
TECP 700-700, Vol. III, Section 7-24, paragraph 7. The weapon
shall be cooled to ambient temperature after each burst. Note
that no reference rounds are to be used for this test using
inspection equipment shown on EL8649405.
*
4.6.1.4.7 Attitude. One hundred cartridges shall be fired
in a single burst from an M2 BMG with M19 BFA mounted on an M4
Pedestal Mount, 10885124, with Machine Gun Mount, 7046650, at an
elevation of +85 degrees from the horizontal. One hundred
cartridges shall be fired in a single burst from an M2 BMG with
85 degrees from the horizontal.
M19 BFA at an elevation of
*
4.6.1.4.8 Belt pull. The cartridges shall be fired in a
continuous 100 round burst from the weapon with the 100 round
belt of cartridges allowed to hang freely. The test shall be
conducted IAW TECP 700-700 , Vol. III, Section 7-15, using the
inspection equipment shown on EL8649406.
*
4.6.1.4.9 Hot chamber. A belt of 102 linked test
cartridges shall be linked in the following manner:
One hundred test cartridges followed by one dummy followed by
one more test cartridge shall be linked up for a total belt of
102. The 102nd cartridge being the hot chamber effects test
Fire the 100 cartridges in a continuous burst in the
cartridge.
weapon with BFA using the Inspection equipment shown on
On misfiring on the 101 dummy cartridge, immediately
EL8649406.
recharge the weapon to bring the test cartridge into battery.
Record the time if the test round fires. After 30 minutes remove
the test cartridge and examine and record any damage to the test
cartridge, the weapon, or to the barrel chamber.
29
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals