 |
|||
|
|
|||
| ||||||||||
|
|  INCH POUND
MIL-C-70741 (AR)
W/AMENDMENT 2
06 July 2007
SUPERSEDING
MIL-C-70741 (AR)
W/AMENDMENT 1
27 February 1992
MILITARY SPECIFICATION
CONTAINER, METAL, PA117
This specification is approved for use by the U.S. Army Armament Research
Development and Engineering Center (ARDEC), and is available for use by all
Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers requirements and quality assurance
provisions for the manufacture of a family of metal containers used for packing 105MM
howitzer ammunition and 105MM tank ammunition.
2. APPLICABLE DOCUMENTS
2.1 Government documents.
2.1.1 Specifications, standards and handbooks. The following specifications,
standards and handbooks form a part of this document to the extent specified herein.
Unless otherwise specified, the issues of these documents are those listed in the issue of
the Department of Defense Index of Specifications and Standards (DODISS) and
supplement thereto, cited in the solicitation.
SPECIFICATIONS
FEDERAL
TT-C-490
- Cleaning Methods for Ferrous Surfaces
and Pretreatments for Organic Coatings
Comments, suggestions, or questions on this document should be addressed to the Commander, U.S. Army
ARDEC, ATTN: AMSRD-AAR-QES-E, Picatinny, NJ
07806-5000 or emailed to ardec-
tdzn@pica.army.mil. Since contact information can change, you may want to verify the currency of this
address information using the ASSIST Online database at http://assist.daps.dla.mil.
AMSC N/A
FSC 8140
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals