Click here to make tpub.com your Home Page

Page Title: Crimp sleeve
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home

   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 




img
MIL-C-83522/16B
w/AMENDMENT 1
Protective cover:  The protective cover shall consist of a lanyard which
attaches to the optical fiber cable and a cap for covering the connector.
The protective cover shall be installable after the connector termination
process is complete.  The protective cover shall be subjected only to the
temperature/humidity cycling and fungus tests.  The protective cover shall
not be provided with the plug connector, and may be procured separately.
Crimp sleeve:  The crimp sleeve shall accept single fiber cordage with a
maximum outer diameter of 2.50 mm (.098 inch).  The plug connector shall
meet all requirements when the crimp sleeve is assembled to the plug
connector using one of the following:  A hex crimp die measuring 4.84 mm
.05 mm (.190 inch .001 inch) across the flats, a circular indent ring
crimp die with a 2.67 mm .08 mm (.105 inch .003 inch) minor diameter and a
3.43 mm .008 mm (.135 inch .003 inch) major diameter, or a circular indent
ring crimp die with a 2.29 mm .08 mm (.090 inch .003 inch) minor diameter
and a 3.05 mm .008 mm (.120 inch .003 inch) major diameter.
Group A inspection:  During group
A inspections, plug dimension E shall be
verified on all items.  All other
dimensions may be verified on a sampled
basis.  Weight may be verified on
a sampled basis.  The qualifying activity
shall be notified of all failures
during any sampled inspections.
The plug connector mates with MIL-C-83522/17 adapter and MIL-C-83522/18 PC
mount receptacle.
Part or Identifying Number (PIN) is a new term encompassing previous terms
used in specifications such as part number, type designator, or
identification number and is as follows:
M83522/16
-
XXXX
Configuration:
A (locking boot, long cap)
D (nonlocking boot, either long or short cap)
Configuration
E (protective cover)
Temperature:
H (high)
Temperature
N (normal)
Fiber size:
X (type I)  (125 m, MM)
Fiber size
Y (type II) (125 m, SM/MM)
Z (type I)  (140 m, MM)
Additional
considerations
Additional consideration:
S qualified to space flight requirements
Patent notice:
Deleted.
6

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business