 |
|||
|
Page Title:
Figure 1. Dimensions and Configurations |
|
||
| ||||||||||
|
|  MIL-C-83522/1F
Min
Max
K dimensions
50/125 m
62.5/125 m
100/140 m
A
.3858 (9.799)
.3863 (9.812)
fiber
fiber
fiber
C
.080 (2.03)
.100 (2.54)
.1300 max
.1300 max
.1450 max
D
.179 (4.55)
.182 (4.62)
.1275 min
.1275 min
.1425 min
E
.220 (5.59)
.233 (5.92)
F
.485 (12.32)
---
Inches
mm
G
.183 (4.65)
.244 (5.69)
Inches
mm
.0625
1.588
.001
0.02
H
---
.150 (38.1)
.0847
2.151
.002
0.05
J
.015 (0.38)
.045 (1.14)
.0850
2.159
.005
0.13
Plug must enter
B
Plug must not
.090
2.29
.010
0.25
.124 dia. hole
enter .118 hole
.123
3.12
.015
0.38
gauge
gauge
.124
3.15
.024
0.61
.127
3.23
.028
0.71
.131
3.33
.030
0.76
.250
6.35
.036
0.91
.309
7.85
.046
1.17
.315
8.00
.060
1.52
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Millimeters are in parentheses.
4. Dimensions for fiber optic cable shall be in accordance with MIL-PRF-85045.
5. K dimension is specified in micrometer. This dimension is critical to fiber alignment. Dimensions for fiber
optic fiber shall be in accordance with MIL-PRF-49291.
6. Dimension A is obtained after product has been assembled.
7. Ferrule may be an integral part of component.
8. One full length sleeve to be used in conjunction with two step-down nose connectors.
9. One-half length sleeve to be used in conjunction with one step-down nose connector and one receptacle
(active device).
10. O-ring is required. Component shall be machined for either O-ring location A or location B.
11. Dimension of O-ring area.
FIGURE 1. Dimensions and configuration - Continued.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals