 |
|||
|
|
|||
| ||||||||||
|
|  MIL-C-83522/1F
Part or Identifying Number (PIN): See table I.
TABLE I. PIN.
PIN
Fiber size
M83522/1-
m
03
50/125
03
62.5/125
04
100/140
REQUIREMENTS:
Metals: The plug housing shall be of corrosion resistant steel in accordance with SAE-AMS-QQ-S-763, class 303
or nickel plated brass in accordance with ASTM-B36/B36M alloys C23000, C24000, C26000, or C26800 or ASTM-
B16/B16M or ASTM-B122/B122M alloys C377000, C46400, C48200, or C48500. Other metal components shall be
of corrosion resistant steel in accordance with SAE-AMS-QQ-S-763, class 303; nickel plated beryllium copper in
accordance with ASTM-B196/B196M except alloy C17000, ASTM-B197/B197M, or ASTM-B194 except alloy
C17000 or nickel plated brass in accordance with ASTM-B36/B36M alloys C23000, C24000, C26000, or C26800 or
ASTM-B16/B16M or ASTM-B122/B122M alloys C377000, C46400, C48200, or C48500.
Epoxies: Use Trabond 230, Eccobond 144B or an equivalent epoxy approved by the qualifying activity.
Dimensions and configuration: See figure 1.
Fiber optic cable requirements:
Cable diameter: In accordance with MIL-PRF-85045.
Cable configuration: In accordance with MIL-PRF-85045.
Fiber diameter: 50/125 m, 62.5/125 m, and 100/140 m.
Fiber numerical aperture: In accordance with MIL-PRF-49291.
Fiber type: Multimode.
Fiber optic contact:
Method of optical alignment: Ferrule/sleeve type (see figure 2).
Lens configuration: Not applicable.
Coating requirements: Not applicable.
4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals