 |
|||
|
|
|||
| ||||||||||
|
|  MIL-D-16196E(SH)
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
B1.12 - Class 5 Interference Fit Thread.
(Application for copies should be addressed to the American National
Standards Institute, 1430 Broadway, New York, NY 10018.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
A 395 - Standard Specification for Ferritic Ductile Iron
Pressure - Retaining Castings for Use at Elevator
Temperatures.
B 265 - Standard Specification for Titanium and Titanium Alloy
(DoD adopted)
Strip, Sheet, and Plate.
B 338 - Standard Specification for Seamless and Welded Titanium
and Titanium Alloy Tubes for Condensers and Heat
(DoD adopted)
Exchangers,
B 552 - Standard Specification for Seamless and Welded
Copper/Nickel Tubes for Water Desalting Plants.
- Standard Test Methods for Chloride Ion in Water.
D 512
(DoD adopted)
D 3951 - Standard Practice for Commercial Packaging
(DoD adopted)
(Application for copies should be addressed to the American Society for
Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.)
(Non-Government standards and other publications are normally available from
These documents also
the organizations that prepare or distribute the documents.
may be available in or through libraries or other informational services. )
In the event of a conflict between the text of
2.3 Order of precedence.
this document and the references cited herein, the text of this document takes
Nothing in this document, however, supersedes applicable laws and
precedence.
regulations unless a specific exemption has been obtained.
3.
REQUIREMENTS
When specified (see 6.2), a sample shall be subjected
3.1 First article.
to first article inspection (see 6.5) in accordance with 4.3.
3.2 Materials.
The materials shown in table I shall be used as the basis
for design,
They shall be used in the construction of the distillation units
except that the manufacturer shall have the option of substituting commercial
material having equal or better physical and chemical properties than the
Proposed alternate
materials specified under Federal or Military specifications.
materials shall be subject to approval by the design review activity
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals