|
| MIL-D-19326H
INDEX (CONT'D)
Para.
Check valves
3.6.6
Converter selection and installation
3.6.1
Permanently installed converters
3.6.1.2
Converter mounting
3.6.1.3
Converter mounting bracket
3.6.1.3.1
Dummy converter
3.6.1.4
Removable converters
3.6.1.1
Disconnects
3.6.7
Emergency oxygen "
3.6.15
Fill-build-up vent valve
3.6.4
Drain valve (permanently installed
3.6.4.3
converters)
Fill line (permanently installed converters}
3.6.4.1
Vent line
3.6.4.2
Fittings
3.6.10
Hoses
3.6.8
Metal hose
3.6.8.1
Tetrafluoroethylene hose
3.6.8.2
Liquid oxygen quantity indicator
3.6.2
Gauging System
3.6.2.4
Indicator location
3.6.2.1
Low-pressure, low-level warning system
3.6.2.3
Press-to-test
3.6.2.2
Personal services
3.6.13
Flow requirement
3.6.13.1
Portable oxygen system
3.6.14
Portable oxygen system (1800 psi) (12.41 MPa)
3.6.14.1
Portable oxygen system (300 psi) (1068 kPa)
3.6.14.2
Pressure relief valve
3.6.5
Regulators
3.6.3
Non-panel mounted
3.6.3.2
Applicable to the Navy
3.6.3.2.1
Panel mounted
3.6.3.1
Preinstallation tests
3.6.3.3
Torque of joints
3.6.11
Torque requirements for flared tube connections
Table VIII
Tubing
3.6.9
Evaporation and warming tubing
3.6.9.1
Minimum length of tubing between converter
Table VI
and first station
Approximate length of supply tubing to
Table VII
frost line
Tubing flaring and bending
3.6.9.2
Oxygen coupling sleeve
3.6.9.3
Tubing marking
3.6.9.5
Tubing routing and mounting
3.6.9.4
MARGINAL NOTATIONS
6.9
64
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |