|
| MIL-D-23222A(AS)
3.1.1
(Cont)
(2) Tests involving the carrying and release of guided
missiles shall be performed at the NAVMISCEN
(Naval Missile Center), Pt. Mugu, California.
(3) Armament tests shall be performed at a location
specified by COM NAVAIRTESTCEN.
3.1.2
TEST AUTHORITY. - For purposes of this speci-
fication, a "Test Authority" is defined as
the applicable NAVPRO (Naval Plant Representative), or the commander
of an activity or facility which is assigned by NAVAIR or by COMNAV-
AIRTESTCEN under the policy set forth in this specification, to
conduct and witness demonstrations and tests required to be performed
under the terms of this specification or other applicable documents.
Test Authorities shall witness or designate witnesses for the demonstra-
tions and tests, and shall approve demonstration plans, instrumentation,
data-reduction procedures, and all test methods and procedures for
which detailed methods and procedures are not specified herein or in
other applicable documents. For test authorities other than COM
NAVAIRTESTCEN, the COM NAVAIRTESTCEN shall furnish instructions concerning
the duties and responsibilities of test witnesses so that the actual
performance of the tests, the collection of data during the tests, the
decisions made during and subsequent to the tests, and the reporting
and documentation of' test results will be consistent, comprehensive,
and serve the best interests of the Government. Tests that are
specified to be performed at one facility and that musts of necessity,
be performed at some other facility, regardless of location, shall
remain under the direction of the specified test authority.
3.1.3
HELICOPTER CONFIGURATION FOR DEMONSTRATION
TESTS. - Except for the necessary addition of
ballast to attain specified center-of-gravity locations, except for the
necessary installation of special test instrumentation, and except as
otherwise approved in writing by the test authority, or by the NAVAIR,
helicopters employed in the performance of formal demonstration tests
shall be identical, within production tolerances, to helicopters of
the same contract which are to be delivered or have been delivered for
trials and to the Fleet. No special installation or deletion of any
kind shall be undertaken without the aforementioned specific written
approval. The word "formal" in the first sentence of this paragraph
refers to all demonstration tests, the results of which are intended
to show that a design requirement has been met in the test or that
7
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |