 |
|||
|
|
|||
| ||||||||||
|
| MIL-D-23222A(AS)
3.19.1.1
(Cont)
(3) Symbols, abbreviations, and units, if they do not
appear in standard lists of airplane and helicopter
nomenclature, or in documents listed in Paragraph 2,
herein, pertaining to the material in the report,
shall be defined in a separate table of definitions.
(4) Documents referred to in a report for clarity shall
be limited to those known to be available in NAVAIR;
otherwise the contractor shall furnish two copies
of the reference documents to NAVAIR along with
the material which refers to them.
(5) Reports shall be bound in flexible pronged metallic
paper fasteners or other means which will facilitate
removal, addition, or replacement of pages without
resort to mechanical devices for disassembly and
reassembly of the reports.
(6) Reports of more than 10 pages shall be indexed.
(7) Contents of the report of 3.19.2.5 shall be presented
appropriately sectionalized so that all data con-
cerning each principal category are submitted on
consecutive pages that may be separated from the
data concerning all other categories. This require-
ment does not apply to the index.
(8) The reports of 3.19.2.1 and 3.19.2.6 may be combined
provided that the data of 3.19.2.6 are presented on
consecutive pages that may be separated from all
other contents of the combined reports.
(9) The reort of 3.19.2.7 may be combined with the
report of 3.19.2.2 provided that the data of
3.19.2.7 are presented on consecutive pages that
may be separated from all other contents of the
combined reports.
(10) Reports covering development tests performed by the
Contractor but which are not specifically required
by this specification shall be prepared and sub-
mitted as specified herein.
(11) The reports of 3.19.2.14 and 3.19.2.15 may be com-
bined with report of 3.19.2.5 provided that these
data are each presented on consecutive pages that
may be separated from all other contents of the
combined reports.
95
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals