Inspection of packaging.

Page Title: Inspection of packaging.
Back | Up | Next

Web
www.tpub.com

Information Categories

....

MIL-D-52916A(ME)

increment shall include data from the noisiest position. Additionally, the noise level at the

typical operating position shall be provided as dB(A) level. Failure to comply with

MIL-STD-1474 provisions shall constitute failure of this test.

4.6 Run-in. Each distributor shall be run-in in accordance with the manufacturer's standard

practice. The run-in shall be of a 20 minute duration. The standard practice procedure, with

appropriate failure criteria, must be approved by the Government. Any failure during the run-in

shall be cause for rejection of the distributor.

4.7 Inspection of packaging. The preservation, packaging and marking of the truck and

equipment shall be examined to determine compliance with the applicable quality assurance

provisions of MIL-D-771 and the addition requirements in section 5 specified herein.

5 PACKAGING

5.1 Preservation. Preservation shall be level A, B, or C as specified (see 6.2).

5.1.1 Level A and B. Each complete distributor shall be preserved in accordance with the

applicable level A or B requirements of MIL-D-771.

5.1.2 Level C. The critical surfaces required for fit or function shall be protected by

preservation coatings, volatile corrosion inhibitors or dessicated packs. A guide shall be

furnished indicating the preservation materials to be removed, in detail, and any other servicing

required prior to placing the distributor in operation.

5.2 Packing. Packing shall be level A, B, or C as specified (see 6.2).

5.2.1 Level A and B. Each complete distributor, preserved as specified in 5.1, shall be

packed in accordance with the applicable level A or B requirements of MIL-D-771.

5.2.2 Level C. Each complete distributor shall be suitably packed for retail distribution

directly to a using customer and in a manner to assure carrier acceptance and safe delivery to the

destination at lowest ratings in compliance with carrier rules and regulations applicable to the

mode of transportation

5.3 Marking. In addition to any special marking specified in the contract or purchase order

(see 6.2), marking shall be in accordance with MIL-STD-129.

6. NOTES

(This section contains information of a general or explanatory nature that may be helpful, but

not mandatory.)

6.1 Intended use. The truck-mounted distributor is intended for distributing liquid bitumen

for road and airfield construction.

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business