 |
|||
|
|
|||
| ||||||||||
|
|  MIL-D-70789A (AR)
3.11 Alerts. The DRU shall indicate an alert condition when
any of the conditions defined in 30.4.6 are present. The DRU
shall provide this information in an ALERT DATA message (30.4.6)
upon receipt of a RETURN ALERT DATA command (30.2.7). The
OVERRIDE ALERT command is sent automatically by the Prime
System/CDU upon receipt of the ALERT DATA. Upon receipt of the
OVERRIDE ALERT command, the DRU shall reset all overridable
alerts. In the case of non-overridable alerts, the alerts shall
not be reset until the appropriate action has occurred. Table V
provides information and requirements pertinent to alerts.
The ALERT DATA data field is either 5 or 6 characters depending
on whether the Expanded Alerts Configuration flag is reset or set
(3.5.8.8k). When the Expanded Alerts Configuration flag is reset
any of the alert conditions in ALERT DATA character D6 shall not
trigger STATUS bit S2/1.
ALERT DATA D6/6 and D6/7 are reserved for supplier use only and
shall not be implemented by the system integrator.
88
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals