|
| ![]() INCH-POUND
MIL-E-1/197E
14 April 2003
SUPERSEDING
MIL-E-1/197D
15 April 1974
MILITARY SPECIFICATION SHEET
ELECTRON TUBE, RECEIVING
TYPE 6L6WGB
This specification sheet is inactive for
new design after 7 March 1997.
This specification is approved for use by all Depart-
ments and Agencies of the Department of Defense.
The requirements for acquiring the electron tube described
herein shall consist of this document and MIL-PRF-1.
DESCRIPTION: Pentode, rugged, beam-power amplifier.
Outline
---
11-2 (EIA) except for base
Base
---
B7-59 or B6-84 (phenolic)
Envelope
---
T11
Cathode
---
Coated unipotential
Base connections:
Pin no.
1
2
3
4
5
7
8
Element
---
nc
h
a
g2
g1
h
k,
beam plates
ABSOLUTE RATINGS:
Parameter:
Ef
Eb
Ec1
Ec2
Ehk
Pp
Pg2
Alt
Unit:
V
V dc
V dc
V dc
v
W
W
ft
Maximum:
6.9
400
---
300
200
26
3.5
1/
Minimum:
5.7
---
---
---
---
---
---
---
Test conditions:
6.3
250
-14
250
---
---
---
---
GENERAL:
First Article test is required and shall consist of all tests in table I with a sample size of 2 for a lot size less than
or equal to 150 units and a sample size of 4 units for a lot size greater than or equal to 151 units. All samples shall
pass conformance Inspection part 1 of table I before continuing. Half of the samples shall then be subjected to
conformance inspection, part 2, and the remaining samples shall be subjected to part 3, with no test failures
permitted during any testing.
After First Article approval, acceptance testing shall consist of conformance inspection, part 1 of table I utilizing
an accept on zero defects (c=0) sampling plan with sample size in accordance with table III, category XVI of MIL-
PRF-1.
AMSC N/A
1 of 3
FSC 5960
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |