 |
|||
|
|
|||
| ||||||||||
|
|  MIL-E-19141D
"DO NOT REMOVE THIS LABEL
Protect yourself and others.
Read and understand this label.
WARNING :
FUMES AND GASES can be dangerous to your health. ARC RAYS can injure
eyes and burn skin. ELECTRIC SHOCK can kill.
s
s
Read and understand the manufacturer instructions and your employer
safety practices
Keep your head out of the fumes.
Use enough general ventilation or exhaust at the arc or both to keep
fumes and gases from your breathing zone, and the general area.
Wear correct eye, ear and body protection.
Do not touch live electrical parts.
See American National Standard 249.1 "Safety in Welding and Cutting"
published by the American Welding Society, Inc., 550 NW LeJeune Road,
P.O. Box 351040, Miami, FL 33135; OSHA Safety and Health Standards,
29 CFR 1910 are for sale by the Superintendent of Documents, U.S.
Government Printing Office, Washington, DC 20402."
5.3.1.1 Packages of type MIL-I-A2c electrodes or the smallest integral
unit within a shipping container shall carry the following warning label or
equivalent, prominently displayed in legible type on the package:
"WARNING: Coverings of MIL-I-A2c electrodes are electrically conductive.
Use appropriate safeguards when changing electrodes and during welding."
5.3.2 Exterior shipping containers and palletized unit loads. Shipment
marking information shall be provided on exterior shipping containers and pal-
s
letized unit loads, in accordance with the manufacturer commercial practice.
In addition to the information required for interior packages as specified in
5.3.1, the information shall include shipping destination, stock number as
s
s
listed by contract, and customer order number, customer item number and
customer's name.
5.3.3 All containers shall be marked "ASBESTOS FREE".
6.
NOTES
6.1 Intended use. Type MIL-I-A2a and MIL-I-A2c welding electrodes are
intended for hardfacing applications on carbon and low alloy steels.
6.2
Ordering data.
6.2.1 Acquisition requirements.
Acqluisition documents should specify the
.
.
following:
(a)
Title, number and date of this specification.
(b)
Electrodes should be ordered by the pound.
(c)
Type, class and size (see 1.2).
(d)
whether alloy identity testing of the core wire of each covered
electrode after final marking is required (see 3.3.5 and table VI).
(e) Specify inspection system (see 4.1.1).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals