 |
|||
|
|
|||
| ||||||||||
|
|  MIL-E-23457B(SHIPS)
PUBLICATIONS
MILITARY
NAVSEA 0901-LP-412-0022 - Naval Ships Technical Manual, Chapter 9412 Diesel
Engines (Propulsion and General Purpose) .
(Copies of specifications, standards, drawings, and publications required by suppliers
in connection with specific procurement functions should be obtained from the prcuring
activity or as directed by the contracting officer.)
2.2 Other publications. The following documents form a part of this specification to
the extent specified herion. Unless otherwise indicated, the issue in effect on date of
invitation for bids or request for proposal shall apply.
FOR TESTING AND MATERIALS (AsTM)
AMERICAN SOCIETY
A320 - Alloy-Steel Bolting Materials for Low-Temperature Service.
B75 - Seamless Copper Tube.
B98 - Copper-Silicon Alloy Rod, Bar, and Shapes.
Bill - Copper and Copper Alloy Seamless Condenser Tubes and Ferrule Stock.
B135 - Seamless Brass Tube.
B139 - Phosphor Bronze Rod, Bar, and Shapes.
B171 - Copper-Alloy Condenser Tube Plates.
B283 - Copper and Copper-Alloy Die Forgings (Hot-pressed).
B584 - Copper Alloy Sand Castings for General Applications.
D189 - Conradson Carbon Residue of Petroleum Products, Test for.
D524 - Rams Bottom Carbon Residue of Petroleum Products, Test for.
D664 - Neutralization Number by Potentiometric Titration, Test for.
D874 - Sulfated Ash from Lubricating Oils and Additives, Test for.
D893 - Insoluble in Used Lubricating Oils, Test for.
(Application for copies should be addressed to the American Society for Testing and
Materials, 1916 Race Street, Philadelphia, Pennsylvania 19103.)
NATIONAL BUREAU OF STANDARDS
Handbook H28 - Screw-Thread Standards for Federal Services.
(Application for copies should be addressed to the Superintendent of Documents, Govern-
ment Printing Office, Washington, D.C. 20402.)
UNIFORM CLASSIFICATION COMMITTEE
Uniform Freight Classification Rules.
(Application for copies should be addressed to the Uniform Classification Committee,
Room 1106, 222 South Riverside Plaza, Chicago, Illinois 60606.)
NATIONAL MOTOR FREIGHT TRAFFIC ASSOCIATION INCORPORATED, AGENT
National Motor Freight Classification Rules.
(Application for copies should be addressed to the National Motor Freight Traffic
Association, Inc., 1616 P Street, N.W., Washington, D.C. 20036.)
(Technical society and technical association specifications and standards are generally
available for reference from libraries. They are also distributed among technical groups
and using Federal agencies.)
3.
REQUIREMENTS
3.1 Sample for the first article inspection. Prior to beginning production a sample shall
be tested as specfied in 4.4 (see 6.3).
3.2 Engine rating. The engine horsepower (hp) rating and speed shall be as specified
(see 6.2.1) and indicated on the engine identification plate (see 3.11.1). This rated hp
output, unless otherwise specified in the contract or order, corresponds to full-power
operation of the ship, or it's equipment under ship trial conditions. This engine rated
hp shall be not greater than the hp value chosen as the 100 percent "rated-load" condition
for the endurance test specified in 4.4.2.2.
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals