Electrodes - Welding, Flux Cored, Low-Alloy Steel

Page Title: Electrodes - Welding, Flux Cored, Low-Alloy Steel
Up | Next

Web
www.tpub.com

Information Categories

....

MIL-E-24403/2C(SH)

7 July 1989

SUPERSEDING

MIL-E-24403/2B(SH)

28 August 1985

(See 6.6)

MILITARY SPECIFICATION

ELECTRODES - WELDING, FLUX CORED, LOW-ALLOY STEEL

This specification is approved for use by the Naval Sea Systems Command,

Department of the Navy, and is available for use by all Departments and

Agencies of the Department of Defense.

SCOPE

1.1 Scope. This specification covers low-alloy steel flux cored welding

electrodes for the fabrication of HY-80 and HY-100 steel weldments for as-welded

applications.

1.2 Classification. Electrodes shall be of the types specified (see 3.3)

and shall be of the forms and sizes in accordance with MIL-E-24403. In addition

to the sizes specified in MIL-E-24403, the 0.035-inch size may be used for

MIL-101TC, MIL-101TM, MIL-121TC, and MIL-121TM type electrodes. Also, the 0.068-

and 0.072-inch sizes may be used for self-shielded electrodes.

APPLICABLE DOCUMENTS

2.1 Government documents.

2.1.1 Specifications, standards, and handbooks. The following specifi-

cation, standards, and handbooks form a part of this document to the extent

specified herein. Unless otherwise specified, the issues of these documents are

those listed in the issue of the Department of Defense Index of Specifications and

Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2).

AMSC N/A

FSC 3439

DISTRIBUTION STATEMENT A.

Approved for public release; distribution is unlimited.

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business