 |
|||
|
Page Title:
Low/high battery voltage charge current |
|
||
| ||||||||||
|
|  MIL-E-50739(MU)
8 August 1973
TABLE V
INSPECTION EQUIPMENT
4.6.2 Low/high battery voltage charge current. Connect the load
(items 1.1) as specified in table I. Apply the power source (item 2.1) to
PI-24 and adjust tc +24.O +2.O Vdc. Measure the load current to deter-
mine compliance with 3.3.1.1. Disconnect the load (item 1.1) of table I
and connect load (item 1. 2) of table 1. Measure the load current to deter-
mine compliance with 3.3.1.1.
4.6.3 Charger voltage regulation. Connect the load (item 1.3) as
specified in table I. Apply the power source (item 2.1) to P1-24 and adjust
to +24.0 2.0 Vdc. Measure the voltage at P1-4 to determine compliance
with 3.3.1.2. Maintaining the above input conditions, connect P1-15 to
P1-16. Measure the voltage at P1-4 to determine compliance with 3.3.1.2.
4.6.4 Input voltage/charger current regulation. Connect the load
(item 1.2) as specified in table I. Apply the power source (item. 2.1) to
PI-24 and adjust to +18.O O.5 Vdc. Measure the load current to deter-
mine compliance with 3.3.1.3. Adjust power source to +30.0 0.5 Vdc.
Measure load current to determine compliance with 3.3.1.3.
4.6.5 Charger sense voltage. Connect the load (item 1.2) as
specified in table I. Apply the power source (item 2.1) to P1-24 and
adjust to +24.0 2.0 Vdc. Measure sure the voltage at P1-8 and P1-4 to
determine compliance with 3.3.1.4.
11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals