 |
|||
|
|
|||
| ||||||||||
|
|  MIL-F-15733/2K
REQUIREMENTS:
Dimensions and configuration: See figure 1.
Case: Metal.
Case and mounting hardware finish: In accordance with MIL-PRF-15733. Pure tin finish is prohibited.
Terminals:
Style 1: Solderable.
Style 2: Threaded stud.
Recommended mounting torque:
Thread
Maximum
Thread
Maximum
torque (in-lb)
torque (in-lb)
.500-28
80
1.125-18
200
UNEF-2A
UNEF-2A
.625-24
85
.190-32
18
UNEF-2A
UNF-2A
.750-20
100
.250-28
40
UNEF-2A
UNF-2A
Weight: See figure 1.
Operating temperature range: -55C to +85C.
Rated (power) frequency: 0 to 400 Hz.
Rated voltage: See table I.
Rated current: See table I.
Insertion loss: In accordance with MIL-PRF-15733 and the following:
(at +25C): See table I.
(at -55C and +85C): Insertion loss shall be as specified in table I except that a degradation of 2 dB from the
value specified in table I shall be allowed up to 10 MHz.
Seal: In accordance with MIL-PRF-15733.
Temperature rise: +25C maximum for parts rated up to and including 10 amperes.
+35C maximum for parts rated above 10 amperes.
Dielectric withstanding voltage: In accordance with MIL-PRF-15733 except the duration of application of voltage
shall be 1 to 5 seconds.
Insulation resistance: In accordance with MIL-PRF-15733. Insulation resistance measured between both
terminals connected together and the case shall be at least:
Dash numbers
0001 and 0002
- 1,000 megohms
0003, 0004, 0005, and 0006
-
500 megohms
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals