|
| MIL-F-15733/48G
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are for general information only.
3. Metric equivalents are in parentheses.
4. Circuit diagram is for information only.
5. All filters shall be supplied with mounting hardware.
6. Use of style FL92 with or without shoulder is optional.
7. Terminal identification (nonsymmetrical filters): The case shall be marked at the threaded end of the filter, with
the symbol "L" or "C" as follows:
Circuit
Symbol
L1
C
L2
L
8. Recommended mounting torque: 48 ounce-inch maximum.
9. Imperfect thread or undercut optional .050 (1.27 mm) maximum.
10. The flag terminals shall be aligned to within 10 of the vertical (thread bushing flats).
FIGURE 1. Case dimensions and circuit configuration - Continued.
Dimensions
Dash
A
B
C
D
E
F
G
H
no.
Max
Max
Min
Max
Min
Max
Min
Max
Min
Max
Min
Max
Min
Max
0001
.760
.385
.302
.322
.177
.197
.140
.190
.100
.130
.088
.098
.190
.210
(19.30)
(9.78)
(7.67)
(8.18)
(4.50)
(5.00)
(3.56)
(4.83)
(2.54)
(3.30)
(2.24)
(2.49)
(4.83)
(5.33)
0002
.861
.406
.302
.322
.177
.197
.140
.160
.100
.130
.088
.098
.190
.210
(21.87)
(10.31)
(7.67)
(8.18)
(4.50)
(5.00)
(3.56)
(4.06)
(2.54)
(3.30)
(2.24)
(2.49)
(4.83)
(5.33)
0003
.76
.385
.302
.322
.302
.322
.140
.160
.100
.130
.088
.098
.190
.210
(19.3)
(9.78)
(7.67)
(8.18)
(7.67)
(8.18)
(3.56)
(4.06)
(2.54)
(3.30)
(2.24)
(2.49)
(4.83)
(5.33)
0004
.76
.385
.302
.322
.302
.322
.140
.160
.100
.130
.088
.098
.190
.210
(19.3)
(9.78)
(7.67)
(8.18)
(7.67)
(8.18)
(3.56)
(4.06)
(2.54)
(3.30)
(2.24)
(2.49)
(4.83)
(5.33)
0005
.76
.385
.302
.322
.302
.322
.140
.160
.100
.130
.088
.098
.190
.210
(19.3)
(9.78)
(7.67)
(8.18)
(7.67)
(8.18)
(3.56)
(4.06)
(2.54)
(3.30)
(2.24)
(2.49)
(4.83)
(5.33)
FIGURE 1. Case dimensions and circuit configuration - Continued.
2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |