 |
|||
|
Page Title:
Safety clip assembly spring test. |
|
||
| ||||||||||
|
|  MIL-F-20420J(AR)
4.4.3.4.1 First three lots. Beginning with the first lot
produced and continuing until three (3) consecutive lots have
complied with the requirements , eighty (80) flare assemblies shall
be selected from each lot for this test. The lot shall be rejected
if, during the test, three (3) or more flare assemblies fail to
comply with the requirement. The test procedure shall be as
specified in 4.5.6.
4.4.3.4.2 Reduced sampling after three lots. After three (3)
consecutive lots have compiled with the criteria of 4.4.3.4.1,
thirty-two (32) flare assemblies shall be selected from each lot for
this test. The lot shall be rejected if, during the test, two (2)
or more flare assemblies fail to comply with the requirement. The
test procedure shall be as specified in 4.5.6.
4.4.3.5 Safety clip assembly spring test.
(See dwg. 8836958) -
Major defect.
4.4,3.5.1 First three lots. Beginning with the first lot
produced and continuing until three (3) consecutive lots have
complied with the requirements, eighty (80) safety clip assemblies
shall be selected from each lot for this test. The lot shall be
rejected if, during the test, three (3) or more safety clip
assemblies fail to comply with the requirement. The test procedure
s-nail be as specified in 4.5.7.
4.4.3.5.2 Reduced sampling after three lots. After three (3)
consecutive lots have complied with the criteria of 4.4.3.5.1,
thirty-two (32) safety clip assemblies shall be selected from each
lot for this test. The lot shall be rejected if, during the test,
two (2) or more safety clip assemblies fail to comply with the
requirement. The test procedure shall be as specified in 4.5.7.
4.4.3.6 Determination of composition. Determination of
composition or batch record, as applicable (see Table V).
44
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals