 |
|||
|
|
|||
| ||||||||||
|
|  MIL-F-24702(SH)
B93.24 - Method for Verifying the Flow Fatigue Characteristics
of a Hydraulic Fluid Power Filter Element.
B93.25 - Hydraulic Fluid Power - Filter Elements - Verification
of Collapse/Burst Resistance.
B93.31 - Multi-Pass Method for Evaluating the Filtration
Performance of a Fine Hydraulic Fluid Power Filter
Element.
Y14.5 - Dimensioning and Tolerancing.
(DoD adopted)
(Application for copies should be addressed to the American National
Standards Institute, 1430 Broadway, New York, NY 10018.)
AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA, INC.
NAS 1638 - Cleanliness Requirements of Parts Used in Hydraulic
System.
(Application for copies should be addressed to the Aerospace Industries
Association of America, Inc., 1725 DeSales Street, NW, Washington, DC 20036.)
(Nongovernment standards and other publications are normally available from
the organizations which prepare or which distribute the documents. These
documents also may be available in or through libraries or other informational
services.)
2.3 Order of pr ecedence.
In the event of a conflict between the text of
this specification and the references cited herein (except for associated detail
specifications, specification sheets or MS standards), the text of this specifi-
cation shall take precedence. Nothing in this specification, however, shall
supersede applicable laws and regulations unless a specific exemption has been
obtained.
3.
REQUIREMENTS
3.1 Specification sheet. The individual item requirements shall be as
specified herein and in accordance with the specification sheet. In the event of
any conflict between the requirements of this specification and the specification
sheet, the latter shall govern.
3.2 Qualification.
Filter elements furnished under this specification
shall be products which are authorized by the qualifying activity for listing on
the applicable qualified products list at the time set for opening of bids (see
4.3 and 6.3).
3.3 Materials. Unless otherwise specified in the specification sheet, the
filter elements and seals shall be constructed of materials that are compatible
with fluids in accordance with MIL-H-19457, MIL-H-22072; and MIL-H-17672 (see
4.7.7).
3.3.1 Media materials. Filter element media materials shall be compatible
with fluid containing up to 5 percent water. Such contaminated fluid shall not
cause degradation of element performance.
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals