 |
|||
|
|
|||
| ||||||||||
|
|  MIL-F-26301F
STANDARDS
FEDERAL
FED-STD-H28
-
Screw-Thread Standards for Federal Services.
DEPARTMENT OF DEFENSE
MIL-STD-129
-
Military Marking for Shipment and Storage.
MIL-STD-461
-
Requirements for the Control of Electromagnetic Interference Characteristics of
Subsystems and Equipment.
MIL-STD-704
-
Aircraft Electric Power Characteristics.
MIL-STD-810
-
Environmental Engineering Considerations and Laboratory Tests.
MIL-STD-1285
-
Marking of Electrical and Electronic Parts.
(Unless otherwise indicated, copies of the above specifications, standards, and handbooks are available from the
Document Automation and Production Service, Building 4D (DPM-DODSSP), 700 Robbins Avenue, Philadelphia, PA
19111-5094).
2.3 Non-Government publications. The following documents form a part of this document to the extent specified
herein. Unless otherwise specified, the issues of the documents which are DoD adopted are those listed in the issue
of the DODISS cited in the solicitation. Unless otherwise specified, the issues of documents not listed in the DODISS
are the issues of the documents cited in the solicitation (see 6.2).
AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)
NCSL-Z540.1
-
Calibration Laboratories and Measuring and Test Equipment - General
Requirements.
(Application for copies should be addressed to NCSL International, 1800 30th Street, Suite 305, Boulder, Colorado
80301-1026).
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM B633
-
Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel.
ASTM D910
-
Gasolines, Aviation.
ASTM G 21
-
Standard Practice for Determining Resistance of Synthetic Polymeric Materials to
Fungi.
(Application for copies should be addressed to ASTM International, PO Box C700, 100 Barr Harbor Drive, West
Conshohocken, PA 19428-2959.)
INTERNATIONAL ORGANIZATION FOR STANDARDS (ISO)
ISO 10012-1
-
Quality Assurance Requirements for Measuring Equipment - Part 1:
Metrological Confirmation System for Measuring Equipment.
(Application for copies should be addressed to American National Standards Institute (ANSI), 11 West 42nd Street,
New York, NY 10036.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the references cited
herein (except for related associated detail specifications, specifications sheets, or MS standards), the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless
a specific exemption has been obtained.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals