 |
|||
|
|
|||
| ||||||||||
|
|  MIL-F-45060D (PA)
MIL-STD-171 - Systems for Preparation, Painting and
Finishing Metal and Wood Surfaces
MIL-STD-1169- Packaging, Packing and Marking for
Shipment of Inert Ammunition Components
DRAWINGS
U.S. ARMY PICATINNY ARSENAL
9298314 - Fuze, Mine, Comb M605, Parts Arrangement
(Copies of specifications, standards and drawings required by
contractors In connection with specific procurement functions
should be obtained from the procuring activity or as directed
by the contracting officer.)
*For meaning of asterisk see 6.7
3. REQUIREMENTS (see 6.6)
3.1 Material. - Materials shall be in accordance with
applicable drawings and specifications.
3.2 Parts and assemblies. - The parts and assemblies shall
comply with all requirements specified on Drawing 929831.4,
associated drawings, and with all requirements specified in
applicable specifications and standards.
3.3 Embrittlement of springs. - Striker springs, release
pin springs, release pin rings and pressure springs shall not
break when extended to the minimum point of permanent distortion.
*3.4 Non-functioning of head assembly. - The head assembly
prior to loading with silicone grease, shall not function when
a 3.0 pound minimum load is applied to the release pin ring
parallel to the axis of' the release pin, and when a 8.0 pound
minimum load is applied to any one prong, or equally distributed
upon all three prongs parallel to the axis of the head assembly.
*3.5 Functioning of head assembly. - The head assembly,
prior to loading with silicone grease, shall function when a
12.0 pound maximum load is applied to the release pin ring
parallel to the axis of the release pin, and when a 20.0
pound maximum load is applied to any one prong or equally
distributed upon all three prongs parallel to the axis of the
head assembly.
2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals